CEM3 is a composite substrate sheet that consist of glass cloth, glass mat and epoxy resin. It has excellent mechanical processability, punching process applicable, longer drill bit up to 2-5 times; electrical properties and PCB processing similar to FR-4; excellent PTH reliability equivalent to FR-4;UV Blocking and AOI compatible. It is widely used for test & measurement equipment, information home appliances, Car electronics, Automatic controller, Game machine, ect.
Material | Fiberglass cloth, Glass mat, Epoxyresin |
---|---|
Sheetthickness | 0.8-3.2mm |
Color | Yellow/Grey |
Ratedvoltage | 40KV |
Tensilestrength | Excellent |
Size | 36"x48"(915x1220mm), 40"x48"(1020x1220mm), 42"x 48"(1067x1220mm). As requested. |
Copperthickness | 0.5oz(15μm,18μm), 1oz(25μm,35μm), 2oz(70μm), As requested. |
No. | Item | Unit | Test conditions | Standard Value |
1 | Peel Strength | 1b/in | normal condition | 6 |
2 | Surface Resistivity | MΩ | After moisture resistance | >104 |
3 | Volume Resistivity | MΩ.cm | After moisture resistance | >106 |
4 | Dielectric constant | / | c-24-23-50 | <5.4 |
5 | Water absorption | % | e-1/105-des+d-24/23 | <0.35% |
6 | Arc resistance | sec | d-48/50+d-0.5/23 | >60 |
7 | Thermal Stress | % | copper:260℃,20s | >20s |
laminate:260℃,15s-3cl | 15s/3cl | |||
8 | Bending test | % | samples test size 300x300mm | 1.00% |
9 | Warping test | 1.00% | ||
10 | Tg | ℃ | 5 | 130±5℃/△Tg≤3℃ |
11 | Surface | / | / | Good |